Rack and curb, West Butterwick
- REXW-WIN-03-09-016
- Item
- March 1951
Part of Rex Wailes Collection
Captioned "Rack + Curb"
Baker, Paul H J
Racks
Taxonomy
Code
Scope note(s)
Source note(s)
- Glossary
Display note(s)
Hierarchical terms
Racks
Equivalent terms
Racks
- UF Rack
Associated terms
Racks
11 Archival description results for Racks
11 results directly related Exclude narrower terms
The refurbished pinion and hand cranking mechinism at Heage Tower Mill
- GIFF-HWS-04-33
- Item
- 2002
Alan Gifford comments: "The fantail at Heage operates a pair of twin pinions on the rack inside the top of the tower. A hand cranking mechanism is incorporated, to be used if the wind direction has changed significantly since last in use. This entire system was completely overhauled by the contractors."
Gifford, Alan
The refurbished curb at Heage Tower mill shortly before cap replaced
- GIFF-HWS-04-13
- Item
- 2001
Alan Gifford comments: "New oak sub curb timbers were fitted before the refurbished curb and internal rack were refitted. New rollers and link bars were installed. A temporary cap was then fitted to protect the interior."
Gifford, Alan
Curb track removed revealing rotten sub curb timbers at Heage Tower Windmill
- GIFF-HWS-04-12
- Item
- 2001
Alan Gifford comments: "The internal rack and curb have been removed revealing that sub curb timbers were rotten (see GIFF-HWS-04-11)"
Gifford, Alan
Rotten timbers found under curb at Heage Tower Mill
- GIFF-HWS-04-11
- Item
- 2001
Alan Gifford comments: "When the iron curb track was removed the sub timbers were completely rotten and had to be replaced."
Gifford, Alan
Striking gear rack with "Onion" bearing box, Minsmere Level Eastbridge Mill, Leiston
- DOLM-18246
- Item
- 1977
Part of Peter Dolman Collection
Dolman, Peter C J (1955-2002), miller
Detail of Gear Rack of Winding Mechanism
- OGDE-DRW-25-2006
- Item
- 1972
Part of Derek Ogden Collection
Tracing; 720x405; Pencil; Casting detail; WWW 03; Derek Ogden
Ogden, Derek, millwright
Rack and pinion for the sluice, Old Corn Mill, Damerham
- JCPC-26138
- Item
- 1966
Part of Jim Chase Mill Photographs
Print no. 48/15A labelled Damerham Mill
Chase, Jim W (1915-2003), engineer
- PAIS-B-016
- Item
- No date
Part of T B Paisley Collection
Paisley, Thomas Brownlee
Winding rack on collar, post mill, Ramsey
- KGFC-21841
- Item
- 4 June 1968
Part of Kenneth G Farries Collection
E IV 45 Fixed rack for winding ie worm ring
Restored 'Y' Wheel and Striking Rack
- FUWA-02450
- Item
- 2009
Volunteers made a thorough job of renovating the striking rack and 'Y' wheel. At present the wheel is driven by a rope, but originally chain was used.